Version for the visually impaired
Auctions
Ads
press brake Amada HFE M2 8025L
Germany
used (very good)
Price on request
Hydraulic press brake (press brake) Amada HFE M2 8025L used.
8 - axes
Maximum pressing force - 800 kN
Maximum stroke - 350 mm
Weight - 6125 kg
Noise level 74dB (A)
Voltage / Frequency - 400V / 415V / 50Hz
Number of phases - 3
Power consumption - 9kW
Rated current - 16.2A
Including tools (see pictures)
Dismantling in June-July 2024
RF driver Huettinger Elektronik GmbH 1000 Watt, 1597793
- Germany
- used (very good)
Price on request
Used HF driver Huettinger Elektronik GmbH
1000 W, ID. №1597793
RF output A8 / RF-OUT X4 1000 W / 13.56 MHz
RF-in / RF-IN X3 200 mW / 13.56 MHz
Available now.
RF-Driver - AMP Huettinger Elektronik GmbH 1200 Watt, 0102130
- Germany
- used (good)
Price on request
Used HF driver stage Huettinger Elektronik GmbH
1200 watts, ID. No.0102130
HF Output A8 / RF - OUT X4 1200W / 13.56MHz
HF input / RF - INPUT X3 200mW / 13.56MHz
Available now.
press brake Amada ITPS
- Germany
- used (good)
Price on request
Used press brake Amada ITPS
Year of construction: 1991
Bending length: 1250 mm
Press force: 50 tons
Weight: 2610 kg.
Including tools
Available immediately.
linear amplifier Trumpf 600, 0345865, 0137851
- Germany
- used (very good)
Price on request
Used Trumpf 600 linear amplifier,
0345865, 0137851
Type SVEZ 05
Version: SBK036 - 230U040
Voit Turbo H+L
Fully functional
Press brake Trumpf TrumaBend V320
- Germany
- used (refurbished)
Price on request
Used press brake Trumpf TrumaBend V320
Bending length 4080mm
Control DA 69 Delem
Hydraulic clamping above and below
2 * bending aid
Parking position on the right
network card
6 axis backgauge
CNC crowning
press brake Trumpf TrumaBend V130
- Germany
- used (very good)
Price on request
Manufacturer: Trump
Type: TrumaBend V130
Year of construction: 2001
Operating hours 23,546
Bending capacity 130 tons.
unloading
Bending length 3000 mm
installation height
Table width 120 mm
working height
Inclination +/- 10 mm
Dimensions H/W/L
Weight 12,950 kg
Furnishing:
Stable machine frame as a welded construction in all-steel construction
Pressure bar with high bending strength
Electrohydraulic top drive via proportional valves
Modern block hydraulics
CNC backgauge 6 axes
"Modufix" upper tool holder system, manual
Lower tool holder for EV dies, manual clamping, programmable displacement
safety device
Options:
Hydraulic upper tool clamping
Hydraulic lower tool clamping
crowning
Bending aid 1 time
Without tools
The press brake is in very good condition. She was always serviced by Trump. The press brake is available from week 44/2023 by appointment. A visit is possible by appointment.
control module Siemens Simodrive 6SN1118-0DG21-0AA1, 6SN1123-1AA00-0DA1
- Germany
- used (very good)
Price on request
Control board Siemens Simodrive
6SN1118-0DG21-0AA1, version D
6SN1123-1AA00-0DA1, LT module, INT - 80A, version A
The item is used, comes from a Trumpf laser cutting system and was in operation until it was removed.
Errors in the data and subject to prior sale.
control module Siemens Simodrive 6SN1118-0DG21-0AA0, 6SN1123-1AA00-0DA2
- Germany
- used (very good)
Price on request
Control board Siemens Simodrive
6SN1118-0DG21-0AA0, version E
6SN1123-1AA00-0DA2, LT module, INT - 80A, version A
The item is used, comes from a Trumpf laser cutting system and was in operation until it was removed.
Errors in the data and subject to prior sale.
control module Siemens Simodrive 6SN1118-0DG21-0AA1, 6SN1123-1AA00-0BA1
- Germany
- used (very good)
Price on request
Control board Siemens Simodrive
6SN1118-0DG21-0AA1, revision A
6SN1123-1AA00-0BA1, LT module, INT - 25A, version A
The item is used, comes from a Trumpf laser cutting system and was in operation until it was removed.
Errors in the data and subject to prior sale.
instrument cassettes Trumpf RTC
- Germany
- used (good)
Price on request
Used TRUMPF instrument cassettes
suitable for the following Trumpf machines:
TruPunch 1000 / TC 1000R, 2020 / TC 2020FMC / 3000 / TC 3000R, TruPunch 5000 / TC 5000R
TruMatic 3000 / TC 3000L, TruMatic 6000 / TC 600L / 6000L / 7000, TruMatic 1000, TruMatic 2000R
TC 200, TC 2000, TC 500, TC 500R, TC 600L, TC 2020R
Number: 2258880/1522218/0937763/0222137
Control panel Trumpf /HP Hewlett Packard 46087B
- Germany
- used (good)
Price on request
Control panel Trumpf / HP Hewlett Packerd
Year of construction unknown
Current 200mAmps
Voltage: 12V DC
Condition: unchecked
Sacrificial Anode Trumpf 1386020
- Germany
- new
Price on request
Sacrificial anode for the Laser Trumpf
Ref.number: 1386020
Original part
Condition: New
Filter element Handte MF-B 17/8/1, 139809
- Germany
- new
Price on request
Filter element for compact dust extractor (hood) Handte MF-B 17/8/1
Number 139809
MEGI buffer AD=25mm 0342512
- Germany
- new
Price on request
New MEGI-BUFFER OD = 25mm
Quantity 4 pieces
H = 20mm
Thread 15mm
Original spare part
Hinge conveyor belt Trumpf 3040, 4030, 5040, 4050
- Germany
- new
Price on request
Hinge conveyor belt, longitudinal conveyor belt for the laser cutting systems Trumpf 3040, 4030, 5040, 4050
Unperforated tape T = 63, width = 1650, length = 10584 mm
With welded-on side brackets and a driver.
It's an alternative product.
Loading + unloading table Stopa (SheetMaster Trumpf 6000, 5000 - FMC)
- Germany
- used (good)
Price on request
Boo. loading + unloading table for punch Trumpf 5000-1600 FMTs, combi Trumpf 6000-1600 FMTs.
1600 x 4000 mm
The package includes:
2 tables, control cabinet, control panel.
Clamp mechanism Zimmer MKS 2502K
- Germany
- new
Price on request
Clamping element Zimmer MKS 2502K mechanical / pneumatic
Condition: New
Subject to error and prior sale
Plus shipping costs and VAT.
0145985
RF-Driver - AMP Lanny - Trumpf 0140281
- Germany
- new
Price on request
Used high-frequency driver stage Trumpf / Hüttinger - 1000 watts
Manufacturer Hüttinger Elektronik GmbH
HF Driver Stage 1.0KW / RF Driver -AMP
ID.NR.0131606 Status:03
HF output / RF - Out
A 13/X4 1000W / 13.56MHz
HF-Input / RF - Input
X3 200mW / 13.56MHz
HF module carrier box 1.0KW / RF module
ID.NO. 0462040 Status: 04
Errors and prior sale are reserved
Peeling device Trumpf LiftMaster
- Germany
- used (good)
Price on request
Used peeling device for LiftMaster Trumpf
Functioning
press brake Amada HFE M2 8025L
- Germany
- used (very good)
Price on request
Hydraulic press brake (press brake) Amada HFE M2 8025L used.
8 - axes
Maximum pressing force - 800 kN
Maximum stroke - 350 mm
Weight - 6125 kg
Noise level 74dB (A)
Voltage / Frequency - 400V / 415V / 50Hz
Number of phases - 3
Power consumption - 9kW
Rated current - 16.2A
Including tools (see pictures)
Dismantling in June-July 2024
RF driver Huettinger Elektronik GmbH 1000 Watt, 1597793
- Germany
- used (very good)
Price on request
Used HF driver Huettinger Elektronik GmbH
1000 W, ID. №1597793
RF output A8 / RF-OUT X4 1000 W / 13.56 MHz
RF-in / RF-IN X3 200 mW / 13.56 MHz
Available now.
RF-Driver - AMP Huettinger Elektronik GmbH 1200 Watt, 0102130
- Germany
- used (good)
Price on request
Used HF driver stage Huettinger Elektronik GmbH
1200 watts, ID. No.0102130
HF Output A8 / RF - OUT X4 1200W / 13.56MHz
HF input / RF - INPUT X3 200mW / 13.56MHz
Available now.
press brake Amada ITPS
- Germany
- used (good)
Price on request
Used press brake Amada ITPS
Year of construction: 1991
Bending length: 1250 mm
Press force: 50 tons
Weight: 2610 kg.
Including tools
Available immediately.
linear amplifier Trumpf 600, 0345865, 0137851
- Germany
- used (very good)
Price on request
Used Trumpf 600 linear amplifier,
0345865, 0137851
Type SVEZ 05
Version: SBK036 - 230U040
Voit Turbo H+L
Fully functional
Press brake Trumpf TrumaBend V320
- Germany
- used (refurbished)
Price on request
Used press brake Trumpf TrumaBend V320
Bending length 4080mm
Control DA 69 Delem
Hydraulic clamping above and below
2 * bending aid
Parking position on the right
network card
6 axis backgauge
CNC crowning
press brake Trumpf TrumaBend V130
- Germany
- used (very good)
Price on request
Manufacturer: Trump
Type: TrumaBend V130
Year of construction: 2001
Operating hours 23,546
Bending capacity 130 tons.
unloading
Bending length 3000 mm
installation height
Table width 120 mm
working height
Inclination +/- 10 mm
Dimensions H/W/L
Weight 12,950 kg
Furnishing:
Stable machine frame as a welded construction in all-steel construction
Pressure bar with high bending strength
Electrohydraulic top drive via proportional valves
Modern block hydraulics
CNC backgauge 6 axes
"Modufix" upper tool holder system, manual
Lower tool holder for EV dies, manual clamping, programmable displacement
safety device
Options:
Hydraulic upper tool clamping
Hydraulic lower tool clamping
crowning
Bending aid 1 time
Without tools
The press brake is in very good condition. She was always serviced by Trump. The press brake is available from week 44/2023 by appointment. A visit is possible by appointment.
control module Siemens Simodrive 6SN1118-0DG21-0AA1, 6SN1123-1AA00-0DA1
- Germany
- used (very good)
Price on request
Control board Siemens Simodrive
6SN1118-0DG21-0AA1, version D
6SN1123-1AA00-0DA1, LT module, INT - 80A, version A
The item is used, comes from a Trumpf laser cutting system and was in operation until it was removed.
Errors in the data and subject to prior sale.
control module Siemens Simodrive 6SN1118-0DG21-0AA0, 6SN1123-1AA00-0DA2
- Germany
- used (very good)
Price on request
Control board Siemens Simodrive
6SN1118-0DG21-0AA0, version E
6SN1123-1AA00-0DA2, LT module, INT - 80A, version A
The item is used, comes from a Trumpf laser cutting system and was in operation until it was removed.
Errors in the data and subject to prior sale.
control module Siemens Simodrive 6SN1118-0DG21-0AA1, 6SN1123-1AA00-0BA1
- Germany
- used (very good)
Price on request
Control board Siemens Simodrive
6SN1118-0DG21-0AA1, revision A
6SN1123-1AA00-0BA1, LT module, INT - 25A, version A
The item is used, comes from a Trumpf laser cutting system and was in operation until it was removed.
Errors in the data and subject to prior sale.
Company
About
Maschinenportal24.com is a specialized and international industrial portal for owners, managers and employees of companies. The main goal of our platform is to bring people together in one place where they can buy, sell or rent machines.
Our three catalogues cover the areas of industrial advertisements, auctions and a business directory. You will find all kinds of machines, goods and services with us. Ads as well as auctions can be placed either by the seller or by the potential buyer, so as, to find each other quickly and not have to spend a lot of time finding the right partner or product.
There is a fee to register on our portal, which permits our users access to an extensive catalogue that includes companies, machines and services. A simple navigation, broad selection and the possibility to contact the seller directly makes our portal one of the most functional portals in this field.
Blog
- 12.05.2022
- 2241
Rent a mini digger
Whether building a house or in your own garden – larger projects cannot be tackled with just a shovel, spade and pickaxe
- 12.05.2022
- 625
Artificial intelligence
Self-learning neural networks, artificial intelligence, cognitive systems; what is in store for us and how will it change our society?
- 09.04.2021
- 2016
www.MaschinenPortal24.com - resale for used machinery
Machines play a major role in industry and perform important tasks. Notably in production, they are..
