Woodworking industry
Conditions
Manufacturer
  • All
  • AD=25mm
  • aps
  • BALLIU
  • Handte
  • KEB - Trumpf
  • KUKA
  • Lanny - Trumpf
  • Messer Griesheim
  • Müller
  • Rimmert
  • Stopa
  • Trumpf
  • Trumpf /HP Hewlett Packard
  • Trumpf 7,5 Zoll
  • Zimmer
Sales company
  • All
  • MaschinenPortal24
  • Maschinenportal24
  • ООО СТАНКОПРОМ
  • Scriptfabrik Ltd
  • MAFdirekt
Punch laser machine Trumpf TruMatic 6000 - 1600 FMC
  • Germany
  • used (very good)
Price on request
Used punch laser machine Trumpf TruMatic 6000 - 1600 FMC Year of construction: 2002 Machine ON: 106,620 h Laser ON: 97,629 h Beam ON: 14,239 h (As of: 09/2021) Laser type: TLF 3200 Equipment: - Hi-Las high pressure cutting - Laser cutting head with 5 "lens - Laser cutting head with 7.5 "lens - Cutting head quick-change device - progr. Cutting gas selection / pressure setting - capacitive height control (DIAS III) - Function: ContourLas - compact dust extractors - tank heating - Automatic tool changer with 17 stations (21 clamping claws) - 3 clamps - Rotation of all tools - NC-controlled digital maintenance-free three-phase drives - automatic repositioning - Tool length compensation - Quick shutdown of the hydraulics - Automatic shutdown - Automatic partial slides, each 500 x 500 mm - Sensors for both part slides - 2 good boxes - punch suction - Forming possibilities - programmable punching tool lubrication - programmable hold-down devices - adaptive stroke length control - safety devices - Telediagnostic facility - RJ 45 network connection - 3.5 "floppy disk drive - detailed operating instructions Special equipment - 2000 W on laser TruFlow 3200 - Vibration-dampened installation - Function of deburring and rolling technology - Function of thread forming with thread form breakage control - MultiShear function - MultiTool function - MultiBend function - Function signing / fast beading - Soft punch function - ASC advanced stripper control - StripLine - Adjustment cylinder - Chip conveyor with tilting container automation - Lowerable GripMaster (3000 x 1500 mm) for processing longer sheets - Additional table on the right for 4m sheets - Scissor lift table - SheetMaster (3000 x 1500 mm) - Toolmaster 40 with setup parallel to production - TRUMASORT R4
Details
Long goods storage Rimmert RKLT - 3000
  • Germany
  • used (good)
Price on request
Manufacturer: Remmert Type: RKLT 3000, cassette tower Year of construction: 2002 Condition: very good Availability: end of 2021 Shelf system for pipes and long goods consisting of: 1 steel frame RKLT - 3000 Steel frame made of steel construction profiles in welded and screwed design consisting of: Supports with welded-on support arms to hold the cassettes Support attachment by means of floor plates screwed to the concrete floor using adhesive anchors Push-through protection Dressings in the transverse and longitudinal direction Electrical installation by means of cable ducts, etc. on the steel frame Technical data of the steel frame: Number of shelf blocks: 1 piece Total usable number of cassette storage locations: 26 pieces Max. Payload / cassette storage space: 30 kN 1 pc of safety devices Protective fence A protective fence running around the system prevents unauthorized entry. Safety light barriers The station openings are protected by BG-tested light barriers 26 pcs. CASSETTES Cassette - type RKLT 3000 The side walls consist of folded C-sheet metal profiles. Floor bars are welded in at a distance of approx. 1050 mm. Except in the area of the floor spars, the cassette is open at the bottom and at both ends. Additional spacers welded to the side walls in the area of the floor rails create a gap who it z. B. for material storage makes it easy to put a rope slip around the material. The cassettes are painted to RAL 9002. They carry a legible label with the 4-digit cassette number for identification. Technical specifications: Number of cassettes: 26 pieces Load: 30 kN. Inside width of the cassette: 720 mm Inside height of the cassette: 265 mm Inside length of the cassette: 6500 mm Width subdivisions (3-fold) The cassette width can be continuously subdivided in its entire clear width to accommodate several different material positions. 3 base rails (front, middle, rear) are welded into each cassette. 1 pc.forklift - type RKLT 3000 The forklift consists of the following components: Frame: - Sectional steel construction Hoist: - Triplex roller chain hoist - 1 pole-changing lifting drive - Load-independent absolute encoder for the Y-axis Lifting traverse: - 2 support carriages - 1 drive, frequency controlled Technical data: Function V max. Lifting 16 m / min Telescoping 16/32 m / min Payload: 30 kN 2 cross single station (chain conveyor) The transverse single stations are designed as chain conveyors (Exit path = 1 x cassette width) For safety reasons, the cassette is moved in dead man's mode. Technical data Function V max chain conveyor, frequency-controlled 24 m / min . Electric control: 1 PLC control Siemens S7 1 control panel 1 modem various switching and monitoring devices, energy supply and distribution for the system Operating modes: Service operation: Jog mode in fine input and automatic positioning Automatic mode: The following functions can be called up on the operator terminal: Service function Error display Order entry via cassette no. Computer technology Warehouse computer MFR Connection MFR and the ZEDV painting All components of the system (except cassettes) are primed and painted with a minimum layer thickness of 80 μm The cassettes are lacquered twice with a minimum layer thickness of 40 μm Color: RAL 5010 RAL 9002 Error in tech. Data and prior sale reserved
Details
Laser cutting machine Trumpf 3030
  • Germany
  • used (very good)
Price on request
Make: Trumpf Type: TruMatic TC L 3030 Year of construction: 2007 Laser power: 3200 watts Control: Siemens Sinumerik 840D Working area: 3000 mm x 1500 mm x 100 mm • Closed machine frame with integrated laser unit • Laser unit: CO2 laser TLF 3200, high-frequency excited • Cooling unit, log book function • Automatic pallet changer • Longitudinal conveyor belt for small parts / waste • Drives: Gantry drive in combination with linear direct drives • Laser power control • Hi-LAS high pressure cutting • PMS plasma sensors • Programmable power cycles • Microweld • Programmable cutting gas pressure setting • Laser cutting heads 5.0 "and 7.5" • High-speed cutting of thick sheet metal with a 10 “laser cutting head • Cutting head quick-change device • Automatic sheet metal edge detection • APC capacitive height control and process control • Automatic focus position adjustment AutoLas Plus • Automatic switch-off • Work area lighting • Sinumerik 840D control: open PC-based control, easy operation, online help, diagnostic function, maintenance log, technology data, teleservice. • ToPs 100 Lite workshop programming • Safety: multi-beam light barriers, beam guidance completely encapsulated and ventilated with nitrogen, monitoring system, multi-chamber suction and compact dust extractor, protective cabin. • 3.5 “floppy disk drive Additional equipment: Liftmaster Linear. The machine is in good condition and can be viewed under power.
Details
Up
Cookie